50MN2鋼板切割50Mn2鋼板16mm的多少錢一噸價格

• 規格：3~260mm
• 產地：鞍鋼

50MN2鋼板切割50Mn2鋼板16mm的多少錢一噸價格50MN2鋼板切割50Mn2鋼板16mm的多少錢一噸價格

鋼材熱線  

  26801839
本公司主營：鍋爐容器板,合金鋼板，低合金高強度系列、鍋爐及壓力容器鋼板、（歡迎新老客戶）鍋爐板、耐候板及高耐候鋼板、耐磨板、電站工程結構鋼板系列、橋梁結構用鋼板系列、耐腐蝕鋼板系列 、復合鋼板系列。高層建筑結構用 鋼板系列、模具鋼板系列、造船及海洋平臺用鋼板系列、管線鋼板系列、合金結構等多種鋼板。

我公司主要經營——寶鋼 舞鋼 濟鋼 安鋼 天鋼 鞍鋼 等各大鋼廠的板材。
用戶可在我公司選擇按中國國家標準、冶金行業標準及企業內控標準、美國ASTM、ASME標準、日本JISS標準、德國DIN標準、英國BS標準、國際 IO標準和歐洲EN 等標準生產的鋼板以及各種規格，不同幾何形狀的鋼材切割件產品。我公司銷售的鋼材及加工件產品規格為3-200mm厚，≤4.5m寬，≤18m長；加工件的幾何形狀 和尺寸規格，公差為：直線度每m≤0.5mm，垂直度每100mm厚≤8mm，外形尺寸≤1mm，切割面光潔度≤100mm為12.5，≥100mm為25，切割件質量穩定可靠。

鋼板介紹：鋼板是一種寬厚比和表面積都很大的扁平鋼材。鋼板按厚琊分為薄板和厚板兩大規格。 薄鋼板是用熱軋或冷軋方法生產的厚度在0.2-4mm之間的鋼板。薄鋼板寬度在500-1400mm之間。根據不同的用途，薄鋼板采用不同材質鋼坯軋制而成。通常采用材質有普碳鋼、優碳鋼、合金結構鋼、碳素工具鋼、不銹鋼、彈簧鋼和電工用硅鋼等。它們主要用于汽車工業、航空工業、搪瓷工業、電氣工業、機械工業等部門。薄鋼板除軋制后直接交貨之外，還有經過酸洗的、鍍鋅和鍍錫等種、類。 厚鋼板是厚度在4mm以上的鋼板的統稱，在實際工作中，常將厚度小于20mm的鋼板稱為中板，厚度＞20mm至60mm的鋼板稱為厚板，厚度＞60mm的鋼板則需在專門的特厚板軋機上軋制，故稱特厚板。厚鋼板的寬度從0.6mm-3.0mm。厚板按用途又分造船鋼板、橋梁鋼板、鍋爐鋼板、高壓容器鋼板、花紋鋼板、汽車鋼板、裝甲鋼板和復合鋼板等。 鋼板的一個分支是鋼帶，鋼帶實際上是很長的薄板，寬度比較小，常成卷供應，也稱為帶鋼。鋼帶常在多機架連續式軋機上生產，切成定尺長度后就是鋼帶，因此生產率比單張機制時高。
一、船體結構用鋼板（GB712-88） 船體結構用鋼板簡稱船用板。由于船舶工作環境惡劣，船外殼要受海水的化學腐蝕、電化學腐蝕和海生物、微生物的腐蝕；船體承受較大的風浪沖擊和交變負荷；船舶形狀使其加工方法復雜等原因、所以對船體結構用鋼要求嚴格。首先良好的韌性是關鍵的要求，此外，要求有較高的強度，良好的耐腐蝕性能、焊接性能，加工成型性能以及表面質量。為保質量和保證有足夠的韌性，要求化學成分的Mn/C在2.5以上，對碳當量也有嚴格要求，并由船檢部門認可的鋼廠生產。

二、鍋爐用鋼板（GB713-86） 按用途分，鍋爐分工業鍋爐和電站鍋爐用兩大類。工業鍋爐通常是工業企業用于供熱，屬小型鍋爐，其所用鋼材為普通碳素結構鋼和低合金結構鋼。電站鍋爐屬大、中型鍋爐，對鋼材質量有特殊要求，一般要求具有優良綜合性能的合金鋼來制造。

三、容器用鋼板（GB6654-86GB6655-86） 容器用鋼板由于所制造的容器都要承受不同的壓力與強度。一般常壓為31.4MPa或更高；工作溫度常于-20℃-450℃之間，也有低于-20℃。根據容器的工作條件與加工工藝，要求容器用鋼板必須具有良好的冷彎和焊接性能；有良好的塑性和韌性；有高溫短時強度或長期強度性能。為了使容器能承受更高的壓力，減輕結構自身重量，容器用鋼板材質除用優質碳素鋼材之外，目前大多采用低合金結構鋼作材質。容器板分為壓力用碳素鋼和低合金鋼板、多層壓力容器用低合金鋼板等。

四、汽車用鋼板（GB3273-89） 汽車用鋼板主要用于制造汽車大梁（縱、橫梁）、車架等結構件。汽車大梁不但要承受較大的靜載苛，而且要承受一定的沖擊、振動等，因此要求鋼板有一定強度和耐疲勞性能，且要求有較好的沖壓性能和冷彎性能、以適合冷沖成型加工要求，我國現大都采用含碳較低的低合金結構鋼作材質。
還有各種鋼板類簡介及標準、、、、、、
我公司銷售網絡遍及二十多個省市。并以過硬的質量遠銷中東、東南亞、非洲、南北美洲等地。以優異的服務 , 優質的產品贏得了廣大客戶的信賴。我公司將憑借良好的信譽 , 雄厚的實力 , 優質的產品 , 低廉的價格,服務于廣大用戶,愿與廣大新老用戶攜手共進,共創偉業。

Steelwire    

  26801839

022-2680 9

本公司主營：鍋爐容器板,合金鋼板，低合金高強度系列、鍋爐及壓力容器鋼板、（歡迎新老客戶）鍋爐板、耐候板及高耐候鋼板、耐磨板、電站工程結構鋼板系列、橋梁結構用鋼板系列、耐腐蝕鋼板系列 、復合鋼板系列。高層建筑結構用 鋼板系列、模具鋼板系列、造船及海洋平臺用鋼板系列、管線鋼板系列、合金結構等多種鋼板。

Thecompany's main: Boiler and pressure vessel plate, alloy steel plate, low alloyhigh strength series, boiler and pressure vessel plate, welcome new and oldcustomers) boiler plate, weathering board and high weather resistant plate,wear plate, power station project structural steel plate series, bridgestructure with plate series, resistant corrosion steel plate series, compositesteel plate series. High rise building structure with steel plate series, mouldsteel plate series, shipbuilding and offshore platform with steel plate series,pipeline steel series, alloy structure and many other steel plate.

我公司主要經營——寶鋼 舞鋼 濟鋼 安鋼 天鋼 鞍鋼 等各大鋼廠的板材。

Ourcompany mainly engaged in steel plate -- Wugang steel An Gang steel Anshan Ironand steel and other major steel.

用戶可在我公司選擇按中國國家標準、冶金行業標準及企業內控標準、美國ASTM、ASME標準、日本JISS標準、德國DIN標準、英國BS標準、國際 IO標準和歐洲EN 等標準生產的鋼板以及各種規格，不同幾何形狀的鋼材切割件產品。我公司銷售的鋼材及加工件產品規格為3-200mm厚，≤4.5m 寬，≤18m長；加工件的幾何形狀 和尺寸規格，公差為：直線度每m≤0.5mm，垂直度每100mm厚≤8mm，外形尺寸≤1mm，切割面光潔度≤ 100mm為12.5，≥100mm為25，切割件質量穩定可靠。

Userscan choose my company according to China national standard, metallurgy industrystandards and enterprise internal control standard, American ASTM, ASMEstandard, Japanese JISS standard, German DIN standard, British Standard BS, theIO and European EN and standards for the production of steel plate and avariety of specifications, different geometrical shape of steel cuttingproducts. My company sells steel and processing parts specifications thick 3-200mm, is less than or equal to4.5 mwide, is less than or equal to18mlong; workpiece geometry anddimension precision, tolerance for: straightness per M is equal to or less than0.5mm, verticalityeach100mmthickness equalto or less than8mm,shape size equal to or less than1mm,cutting surface is bright and clean degree less than or equal to100 mmto 12.5, 25 is equal to or morethan100mm, cutting qualityis stable and reliable.

鋼板介紹：鋼板是一種寬厚比和表面積都很大的扁平鋼材。鋼板按厚琊分為薄板和厚板兩大規格。 薄鋼板是用熱軋或冷軋方法生產的厚度在0.2-4mm之間的鋼板。薄鋼板寬度在500-1400mm之間。根據不同的用途，薄鋼板采用不同材質鋼坯軋制而成。通常采用材質有普碳鋼、優碳鋼、合金結構鋼、碳素工具鋼、不銹鋼、彈簧鋼和電工用硅鋼等。它們主要用于汽車工業、航空工業、搪瓷工業、電氣工業、機械工業等部門。薄鋼板除軋制后直接交貨之外，還有經過酸洗的、鍍鋅和鍍錫等種、類。 厚鋼板是厚度在4mm以上的鋼板的統稱，在實際工作中，常將厚度小于20mm的鋼板稱為中板，厚度＞20mm至60mm的鋼板稱為厚板，厚度＞ 60mm的鋼板則需在專門的特厚板軋機上軋制，故稱特厚板。厚鋼板的寬度從0.6mm-3.0mm。厚板按用途又分造船鋼板、橋梁鋼板、鍋爐鋼板、高壓容器鋼板、花紋鋼板、汽車鋼板、裝甲鋼板和復合鋼板等。 鋼板的一個分支是鋼帶，鋼帶實際上是很長的薄板，寬度比較小，常成卷供應，也稱為帶鋼。鋼帶常在多機架連續式軋機上生產，切成定尺長度后就是鋼帶，因此生產率比單張機制時高。

Steelplate is a kind of flat steel with wide thickness and large surface area..According to the thickness of plate Ya divided into thick and thin plates twospecifications. A thin plate is a steel plate that is produced by a hot or coldrolling method.. The width of a thin plate is between 500-1400mm. According to the different uses, the thinsteel plate uses the different material billet to roll and becomes. Commonlyused material has carbon steel, carbon steel, alloy structural steel, carbontool steel, stainless steel, spring steel and electrical steel, etc.. They aremainly used in the automotive industry, aviation industry, enamel industry,electrical industry, machinery industry and other departments. In addition tothe direct delivery of the thin plate after the rolling, there are a pickling,zinc and tin plating, etc.. Thick steel plate thickness in more than4mmsteel plate collectively, inpractical work, thickness is less than20mmplate known plate, plate thickness >20mmto60mmsaid platethickness >60mmplate is required in special thick plate rolling mill rolling, so-called superthick steel plate. The width of the thick plate from0.6mm-3.0mm.The plate is divided into shipbuilding steel plate, bridge plate, boiler plate,high pressure vessel plate, pattern plate, automobile sheet, automobile sheet,armor plate, etc.. One branch of the steel is the steel strip, the strip isactually a very long thin plate, the width is relatively small, often into rollsupply, also known as the strip. The steel strip isoften produced in a multi stand continuous mill, cut into length and is thestrip, so the production rate is higher than the sheet fed mechanism..

ship hull structural steel plate (GB712-88) hullstructure is used for short board ship plate. Because of the bad working environmentof ships and ship shell to sea chemical corrosion, electrochemical corrosionand sea creatures, microbial corrosion; ship subjected to large impact of windwave and alternating load; ship shape so that the processing method for thecomplex reasons, so requirements of hull structure steel strictly. First, goodtoughness is the most critical requirements, in addition, the higher strength,good corrosion resistance, welding performance, processing molding performanceand surface quality. To ensure quality and ensure adequate toughness, thechemical composition of Mn/C in more than 2.5, carbon equivalent also hasstrict requirements, and by the ship inspection department approved steelproduction.

二、鍋爐用鋼板（GB713-86） 按用途分，鍋爐分工業鍋爐和電站鍋爐用兩大類。工業鍋爐通常是工業企業用于供熱，屬小型鍋爐，其所用鋼材為普通碳素結構鋼和低合金結構鋼。電站鍋爐屬大、中型鍋爐，對鋼材質量有特殊要求，一般要求具有優良綜合性能的合金鋼來制造。

Two,boiler steel (GB713-86) by use of the boiler, boiler and power station boilerwith two major categories. Industrial boilers are usually used in heating forindustrial enterprises. They are small boilers. The steel used for generalcarbon structural steels and low alloy structural steels. The utility boilerbelongs to the large and medium boiler, and has special requirements for thequality of the steel, and is generally required to produce alloy steel withgood comprehensive properties..

三、容器用鋼板（GB6654-86 GB6655-86） 容器用鋼板由于所制造的容器都要承受不同的壓力與強度。一般常壓為31.4MPa或更高；工作溫度常于-20℃-450℃之間，也有低于- 20℃。根據容器的工作條件與加工工藝，要求容器用鋼板必須具有良好的冷彎和焊接性能；有良好的塑性和韌性；有高溫短時強度或長期強度性能。為了使容器能承受更高的壓力，減輕結構自身重量，容器用鋼板材質除用優質碳素鋼材之外，目前大多采用低合金結構鋼作材質。容器板分為壓力用碳素鋼和低合金鋼板、多層壓力容器用低合金鋼板等。

Three.Container steel plate (GB6655-86 GB6654-86) containers used in the containerare subjected to different pressure and strength.. The normal pressure is31.4MPa or higher, the operating temperature is often -450, and there are alsoless than 20. According to the container of the working conditions and theprocessing technology for container plate must have good cold bending andwelding performance, good plasticity and toughness; strength of thehigh-temperature short or long term strength properties. In order to enable thevessel to withstand higher pressures, reduce the structure of its own weight,container steel material with high quality carbon steel, most of the currentuse of low alloy structural steel as material. The container plate is dividedinto pressure for carbon steel and low alloy steel, low alloy steel plate withmultilayer pressure vessel etc..

四、汽車用鋼板（GB3273-89） 汽車用鋼板主要用于制造汽車大梁（縱、橫梁）、車架等結構件。汽車大梁不但要承受較大的靜載苛，而且要承受一定的沖擊、振動等，因此要求鋼板有一定強度和耐疲勞性能，且要求有較好的沖壓性能和冷彎性能、以適合冷沖成型加工要求，我國現大都采用含碳較低的低合金結構鋼作材質。

Automobilewith plate (GB3273-89) car with steel plate is mainly used for manufacturingautomobile beam (longitudinal and transverse beam and frame structure. Automobile beam not only to bear a larger static harsh,and subjected to the impact and vibration, so plate must have a certainstrength and resistance to fatigue performance and requires good stamping andcold bending performance, suitable for cold punching molding processing requirements,our country now most of the containing low carbon low alloy structure steelmaterial.

還有各種鋼板類簡介及標準、、、、、、

Thereare also various steel sheet profile and standards,,,,,,

我公司銷售網絡遍及二十多個省市。并以過硬的質量遠銷中東、東南亞、非洲、南北美洲等地。以優異的服務 , 優質的產品贏得了廣大客戶的信賴。我公司將憑借良好的信譽 , 雄厚的實力 , 優質的產品 , 低廉的價格,服務于廣大用戶,愿與廣大新老用戶攜手共進,共創偉業。

Mycompany sells the network all over 20 provinces and cities. And with excellentquality are exported to the Middle East, Southeast Asia, Africa, North andSouth Americaand other places. To outstanding service,quality products to win the trust of customers. I will rely on the company withgood reputation, strong strength, quality products, low prices, service in themajority of users, and willing to work with the new and old customers hand inhand, create Albert.

天津國強偉業鋼鐵貿易有限公司銷售 3~260mm，針對 3~260mm客戶提供相關咨詢服務，需要了解 3~260mm型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。

 

相關產品

 

 

公司簡介

 

其它地區 板材 類似信息：