服務熱線：4007-1100-10
型號：Cycoloy PC/ABS MC5215
性能：通用級，15%玻璃增強，Cycoloy PC/ABS合金。
|
CYCOLOY™Resin MC5215 | | Americas: COMMERCIAL |
| Property |
| TYPICAL PROPERTIES(1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, brk, Type I, 5 mm/min | 870 | kgf/cm2 | ASTM D 638 | |
| Tensile Strain, brk, Type I, 5 mm/min | 2.7 | % | ASTM D 638 | |
| Tensile Modulus, 5 mm/min | 58800 | kgf/cm2 | ASTM D 638 | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 1370 | kgf/cm2 | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 52500 | kgf/cm2 | ASTM D 790 | |
| Tensile Stress, break, 5 mm/min | 86 | MPa | ISO 527 | |
| Tensile Strain, break, 5 mm/min | 2.5 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 5910 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 134 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 4970 | MPa | ISO 178 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, notched, 23°C | 7 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, unnotched 80*10*3 +23°C | 32 | kJ/m2 | ISO 180/1U | |
| Izod Impact, unnotched 80*10*3 -30°C | 7 | kJ/m2 | ISO 180/1U | |
| THERMAL | Value | Unit | Standard | |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 95 | °C | ASTM D 648 | |
| Vicat Softening Temp, Rate B/120 | 100 | °C | ISO 306 | |
| PHYSICAL | Value | Unit | Standard | |
| Density | 1.29 | g/cm3 | ASTM D 792 | |
| Melt Flow Rate, 260°C/2.16 kgf | 20 | g/10 min | ASTM D 1238 | |
| Water Absorption, (23°C/sat) | 0.15 | % | ISO 62 | |
| Melt Volume Rate, MVR at 260°C/2.16 kg | 17 | cm3/10 min | ISO 1133 | |
| FLAME CHARACTERISTICS | Value | Unit | Standard | |
| UL Recognized, 94V-1 Flame Class Rating (3) | 1.5 | mm | UL 94 | |
| Source GMD, last updated:2012/08/30 |
| Processing |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 80 - 90 | °C |
| Drying Time | 3 - 4 | hrs |
| Maximum Moisture Content | 0.01 | % |
| Melt Temperature | 250 - 280 | °C |
| Nozzle Temperature | 250 - 280 | °C |
| Front - Zone 3 Temperature | 250 - 280 | °C |
| Middle - Zone 2 Temperature | 240 - 280 | °C |
| Rear - Zone 1 Temperature | 230 - 270 | °C |
| Mold Temperature | 80 - 100 | °C |
| Back Pressure | 3 - 9 | MPa |
| Screw Speed | 30 - 150 | rpm |
蘇州洪大塑膠有限公司銷售 25KG/BAG，針對 25KG/BAG客戶提供相關咨詢服務，需要了解 25KG/BAG型號尺寸、重量、價格、安裝、維護等資料請與我們聯(lián)系。
蘇州洪大塑膠有限公司
經(jīng)營模式：貿(mào)易型
所在地區(qū)：江蘇 蘇州
掃碼打電話