服務熱線：4007-1100-10
low transverse sensitivity
high long-term stability
integrated sensor electronics
low output impedance
long connection lines possible
Description
The dynamic accelerometers BDK3, BDK10, and BDK100 are capacitive spring-mass accelerometers with integrated sensor electronics. Resonant peaks are minimized by dynamic gas damping in the primary transformer.
The sensor electronics require only minimal power and are in conjunction with the capacitive primary transformer characterized by low error and high long-term stability.
Application
The accelerometers BDK3, BDK10, and BDK100 are used for applications requiring high overload resistance, high long-term stability, small lower cut-off frequency, light weight and low power consumption. Typical applications include:
measurements on vehicles, machinery, buildings and plants for process control and error diagnosis
seismic measurements
vibration measurements
safety engineering
dynamic measurement of position and velocity
Technical Specifications
Type BDK3 BDK10 BDK100
Measuring range ±3g (ca.±30m/s2) ±10g (ca.±100m/s2) ±100g (ca.±1000m/s2)
Resolution <10-3g <5·10-3g <5·10-2g
Frequency range 1....300Hz 1....800Hz 1....1500Hz
Sensitivity at Ub = 5Volt appr.150mV/g appr.60mV/g appr.15mV/g
Temperature drift of sensitivity <+6·10-2 % / K
Temperature drift of zero point <0.1mV/K
Zero offset (2.5±0.1)Volt - generally: 0.5Ub±4%
Output impedance approx. 100 Ohm
Linearity deviation <1%
Transverse sensitivity <1%
Mechanical overload resistance in direction of measurement approx.10 000g (appr.100 000m/s2) !
Nominal supply voltage (regulated) UbN = 5Volt
Permissible supply voltage range Ubz=2V ... 16V
Current drawn at Ub = 5V approx. 2mA
Degree of protection IP65
Operating temperature -40°C ... +85°C
Storage temperature -45°C ... +90°C
Weight in stainless steel housing with thread without cable approx. 17Gramm
Weight in small housing without cable approx. 7Gramm
Standard electrical connection 3 highly flexible, color-coded wires ?1mm length approx.18 cm (special lengths on request)
Alternative electrical connection for sensors in stainless steel housing 0.5m strong, flexible, shielded cable, 2 wires + shield, ?2.1mm (special lengths on request)
on request: Special design for very low power consumtion up to 30μA
NB3
Inclinometer for inclination measurement in the range of ±10 degrees
[+]
SEIKA front page
print version (pdf)
Features
上海滄燦自動化科技有限公司銷售東方 個，針對東方 個客戶提供相關咨詢服務，需要了解東方 個型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。
上海滄燦自動化科技有限公司
經營模式：貿易型
所在地區：上海 松江
掃碼打電話