The SB360 is suitable for applications requiring the measurement of any angle for further processing on a PC under harsh operating conditions.
Areas of successful implementation include construction, mining, agricultural machinery, transportation and conveyor systems, ships, operation and automation technology as well as general mechanical engineering.
Technical Specifications
Terminals 2pcs. 6 x 1,5 mm2
Cable fixing M12 x 1.5 cable gland, clamping range 6mm - 7.5mm
Measuring range, Resolution, etc. dependent on implemented SEIKA sensor
Degree of protection IP65
Measuring plane parallel to bottom of housing
Terminator resistance 100 Ohm
Operating temperature -40...85°C
Options: calibration record, silicon encapsulation, custom wiring
SBG2U
(former denotation: SB2G)
Sensor box containing two NG inclinometers and two signal conditioners with 0...5V outputs and extensive temperature drift compensation
SB2G[+]
SEIKA front page
print version (pdf)
Features
robust pressure die cast aluminim housing (IP65)
twist free 4-point fastening of rigid, 3.2mm thick base PCB
integrated signal conditioner with 0...5V signal output
extensive temperature drift compensation
9V ... 30V supply voltage
output signal calibrated to customer's specifications
sensors and signal conditioners electrically isolated from housing
EMC certified
highly stable sensor supply voltage
5V reference voltage available
programmable dynamic response
high mechanical overload resistance
Description
The SBG2U is a pressure die cast alumimium housing (IP65) with two integrated sensors of the NG-series for measuring inclinations along two axis.
In addition to the sensors, the box contains two signal conditioners with a 0 ... 5V output signal each and a highly stable supply voltage that can be used externally as a reference. Furthermore, the signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, and noise voltage filters to guarantee the EMC. Interference signals caused by unwanted ground currents are eliminated by electrically isolating sensor and signal conditioner from the housing.
Unlike the SB2I, the SBG2U can accommodate larger sensors, such as the NG-series, that have a higher measuring accuracy. A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensor.
The compact PG cable gland and compact housing size enable the use of this high quality measuring system in harsh operating conditions.
Application
The SBG2U is suitable for applications in harsh operating conditions requiring the measurement of inclinations along two axis and returning of a 0 ... 5V output signal, where there is enough space so as not to require the use of a smaller SB.. housing. Next to the areas of applications listed for the smaller SB.. casings, the SB2G is especially suited for precise measurements in the automotive temperature range, where small linearity deviations and temperature errors are paramount.
Technical Specifications
Terminals 6 x 1.5mm2
Cable fixing M12 x 1.5 cable gland clamping range 6 - 7.5 mm
Measuring range, Resolution, etc. dependent on the implemented sensor
Degree of protection IP65
Mounting orientation wall mounted
Supply voltage 9V ... 30V
Operating current approx. 12 mA
Normalized output voltage range 0.5V ... 4.5V
Output zero point 2.5Volt
Maximum output voltage range 0.05V ... 4.95V
Output impedance 100 Ohm
Capacitive output loading capacity any, taking dynamic requirements into account
Reference output voltage 5±0.005 Volt (max.0.5mA)
Adjustable variables zero (2.5V), amplification
Low pass filter active, 3rd order, minimal ripple
Operating temperature -40...+85°C
Options: special measuring ranges, calibration protocol, silicon encapsulation, custom wiring
SBG3I
Sensor box containing three SEIKA sensors and three signal conditioners with 4...20mA output
SB2G[+]
SEIKA front page
print version (pdf)
Features
上海滄燦自動化科技有限公司銷售東方 個,針對東方 個客戶提供相關咨詢服務,需要了解東方 個型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。
上海滄燦自動化科技有限公司
經營模式:貿易型
所在地區:上海 松江