服務熱線：4007-1100-10
robust pressure die cast aluminim housing (IP65) with saltwater proof coating
twist free 4-point fastening of rigid, 3.2mm thick base PCB
three integrated signal conditioners with 4...20mA, 2-wire outputs
no separate supply voltage necessary
all SEIKA sensors of the B-, BD- and N- series fit the housing and can be installed in different directions of operation
output signals calibrated to customer's specifications
sensors and signal conditioners electrically isolated from housing
both output channels are electrically isolated from and independent of each other
EMC certified
internal, highly stable sensor supply voltages
10...30 Volt terminal voltage
programmable dynamic response
high mechanical overload resistance
either connection polarity - possibility of 4-wire connection for both measuring loops
low pass filter with optional choice of cut-off frequency for suppression of interference frequencies
Description
The SBG3I is a pressure die cast aluminium sensor housing (IP65) with two integrated sensors for measuring accelerations and/or inclinations along three axis acceleration and/or two axis inclination.
As well as the sensors, the box contains three independent signal conditioners, each with a 4...20mA, 2-wire output, and three separate, highly stable voltage supply feeding off the corresponding current loop, one for each sensor. Furthermore, each signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, an output stage with current limitation, a noise voltage filter and a diode bridge for unipolar connection to the current loop. Interference signals caused by unwanted ground currents are eliminated by electrically isolating each sensor and signal conditioner from each other and the housing.
A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensors. The compact PG cable gland and compact housing size in combination with the 3-wire connection enable the use of this high quality measuring system in harsh operating conditions.
Application
The SBG3I is suitable for applications requiring precise acceleration or inclination measurements along three axis under harsh circumstances and returning of a 4...20mA output signal each. Areas of successful implementation include construction, mining, agricultural machinery, transportation and conveyor systems, ships, operation and automation technology as well as general mechanical engineering.
Technical Specifications
Terminals 6 x 1.5mm2
Cable fixing M12 x 1.5 cable gland clamping range 6 - 7.5 mm
Measuring range, Resolution, etc. dependent on the implemented sensor
Degree of protection IP65
Mounting orientation any
Terminal voltage 10V ... 30V
Minimum loop currents 2.5mA ... 3.5mA
Maximum loop currents 22mA ... 26mA
Output loop current 4...20mA (12mA for zero position)
Adjustable variables zero point (12mA), amplification
Maximum load resistances 500 Ohm (at 24 Volt supply voltage)
Low pass filter active, 3rd order, minimal ripple
Operating temperature -40...+85°C
Options: special measuring ranges, calibration record, silicon encapsulation, custom wiring
SBL1
Sensor box for use in particularly harsh operating conditions containing one sensor and one signal conditioner with 4...20mA, 2-wire output
SBL1[+]
SEIKA front page
print version (pdf)
Features
large, robust pressure die cast aluminium housing (IP65)
angular adjustable, vibration damped 3-point fastening of rigid, 3.2mm thick base PCB
integrated signal conditioner with 4...20mA, 2-wire output
temperature drift compensation
no separate supply voltage necessary
all SEIKA sensors fit the housing and can be installed in different directions of operation
output signal calibrated to customer's specifications
sensor and signal conditioner electrically isolated from housing
extensive EMC protection
highly stable sensor supply voltage
10...30Volt terminal voltage
loop current limitation
high mechanical overload resistance
either connection polarity
low pass filter with optional choice of cut-off frequency for suppression of interference frequencies
上海滄燦自動化科技有限公司銷售東方 個，針對東方 個客戶提供相關咨詢服務，需要了解東方 個型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。
上海滄燦自動化科技有限公司
經營模式：貿易型
所在地區：上海 松江
掃碼打電話