首頁 > 產品 > 圓度檢測儀 > 滄燦張BLH5100K-100東方馬達 > 正文

滄燦張BLH5100K-100東方馬達

規格:個

所屬類型:圓度檢測儀

品牌:東方

  • 價格:電議
  • 發布時間:2020/06/15 17:09
  • 數量:大量
  • 所在地:上海 松江
產品詳情
  • 規格:個
  • 品牌:東方
  • 用途:


typical use





SEIKA front page
SC485B
RS232 / RS485 interface converter for connection of SEIKA sensors with RS485 interface to RS232 port of a computer
[+]
SEIKA front page
print version (pdf)
Features

robust, pressure die cast aluminium housing (IP65) with saltwater proof coating
9...15 Volt supply voltage
either connection polarity
internal 5 Volt stabilizing and internal generation of the +/- RS232 voltage levels
half-duplex RS232 / RS485 bus
up to 128 participants on RS485 bus
9channel SubD RS232 port
LED indicating bus activity
Description

The interface converter consists of an aluminium housing with a PCB, a 9-channel SubD port for the RS232 bus, a 4-channel clamp for the RS485 bus, a plug for the external 12V supply voltage, two LEDs for monitoring system operation, the bus voltage level and termination resistances and the interface electronics with voltage level converters and transmission line drivers and receivers.

Application

The interface converter connects any SEIKA sensor with RS485 data output interface to the RS232 port of a computer.

Technical Specifications

Supply voltage 12Volt ± 3Volt
Current drawn approx.30mA + current drawn by sensors
RS485 terminals 4 x 1.5mm2
RS232 port DSub9 socket
RS485 Bus half duplex
Terminator resistance 100 Ohm, can be disengaged by solder bridge
ESD protection on RS485 bus ±15kV (Human Body Model)
Participants on single bus max. 128
Data transfer rate max. 250kbps
Connection to SEIKA-RS232/485 converter SC485B
NV4a
Filtering signal conditioner for sensor signal matching with symmetrical +/- 4 V voltage output

SEIKA front page
print version (pdf)
Features

low noise and low drift
no regulated supply voltage necessary
internal generation of negative operating voltage
integrated reverse polarity protection
outputs are short circuit proof
highly stable voltage supply for operation of a sensor
protection against reverse sensor polarity
zero position and gain adjustable via potentiometers
electronic components hermetically sealed
optionally frequency programmable, active 5th order low pass filter
optional high pass filter
different connector options
Description

The NV4a amplifies, filters and normalizes the output signals of SEIKA sensors. The symmetrical output signal enables unproblematic subsequent signal processing with standard measuring instruments such as oscilloscopes, transient recorders, A/D converters, multimeters, etc.
Multiple internal switching variants allow for optimal adaptation of signal processing parameters, such as settling time, filter cut-off frequencies and amplification and zero point adjustment, to the measuring task.

Application

The NV4a has its application anywhere a SEIKA sensor is, without much expenditure and under optimal compatibility, to be connected to application specific measuring equipment with optimal matching conditions and subsequent adjustments to amplification and zero voltage are necessary.

Technical Specifications

Dimensions see dimension drawing
Supply voltage 9V ... 30V (polarity protected up to -70Volt)
Current drawn excluding sensors approx. 5mA
Operating temperature 0...70°C
Internally generated sensor supply voltage 5.00 Volt
Temperature drift of sensor supply voltage 20ppm / Kelvin
Output signal range ±3.5 Volt
Offset adjust range 2.4V ... 2.6V (larger ranges on request)
Output impedance approx. 100 Ohm
Signal-to-noise ratio 30μVs.s.
Signal-to-noise ratio with standard sensors approx. 80dB
Frequency range 0...10Hz, 0...200Hz, 0...2kHz, custom ranges on request
Electrical connections pin connector 2.54mm, length 5.7mm, ? 0.63mm gold-plated; solder pads optional
Dimensions (in mm)
NV6a
Filtering signal conditioner for sensor signal matching to a 4...20mA, 2-wire interface

SEIKA front page
print version (pdf)
Features


標簽:圓度檢測儀

上海滄燦自動化科技有限公司銷售東方 個,針對東方 個客戶提供相關咨詢服務,需要了解東方 個型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。

內容申明:華軸網為互聯網信息服務提供者,華軸網(含網站、客戶端等)所展示的商品的標題、價格、詳情等信息內容系由商家發布,其真實性、準確性和合法性均由商家負責。華軸網提醒您購買商品前注意謹慎核實,如您對商品的標題、價格、詳情等任何信息有任何疑問的,請?jiān)谫徺I前與商家溝通確認;如您發現商鋪內有任何違法/侵權信息,請立即向華軸網舉報并提供有效線索。
 
相關產品
 
 
公司簡介
 
上海滄燦自動化科技有限公司 是一家經營**品牌工業自動化的公司,是從事電氣自動化工程設計、施工、安裝、調試,技術服務及工控組態軟件的開發,提供工程設備及備件于一體的高新綜合性公司。公司經營優...更多>>
企業信息

上海滄燦自動化科技有限公司

經營模式:貿易型
所在地區:上海 松江

認證商家