滄燦張BLH5100K-20東方馬達

• 規格：個
• 品牌：東方
• 用途：

Changes in Specifications Steinen’s Industrial Nozzle product line has expanded and changed over the years to meet our customer’s applications. We have made every attempt to make this catalog, and the product data within it, as accurate and complete as possible. However, spray nozzles are a complex product and new user and specification requirements are certain to continue to evolve. Therefore, if you have any special requests for additional technical information or unlisted items, please call our sales service department at 973-887-6400. Steinen reserves the right to change or delete both product and specification data as required without notice. Disclaimer and Errors We believe that the information presented in this catalog is reliable and have carefully compiled and checked it. However, we assume no responsibility for possible errors or omissions. All of the nozzles listed in this catalog are water sprays. Use of these nozzles with other liquids may result in unexpected and potentially dangerous results and is not recommended. Because each application is unique, Steinen makes no warranty as to the merchantability or suitability of any product for a particular use, nor will we be liable for any indirect, incidental or consequential damages that may arise from the use or sale of our product.
Steinen
NOZZLE CROSS REFERENCE CHART
Steinen manufactures a very wide range of industrial nozzles. Some of our customers seek to cross reference Spraying System nozzles, and the chart below will assist you in finding the correct Steinen nozzle equivalent. Steinen manufacturers its nozzles in brass, steel, 303 stainless steel, and 316 stainless steel. Other materials are available upon request. If you have any questions regarding a nozzle cross over, please call us at 973-887-6400 extension 101.
Steinen Mfg. Co. 29 East Halsey Road Parsippany, NJ 07054 T: 973-887-6400 F: 973-887-4632 Email: info@ www.
Copyright 2013 Wm Steinen Mfg Co. & Steinen GmbH
CatalogSpray TypeType BrandType BrandThreadPageFlat SprayH-V V (below 1 gpm) & H-U (1 gpm VeeJetV - Hahn SN579 seriesFan-JetMale6, 9, 27-30H-VVLVeeJetHahn 100 seriesFan-JetMale31KFloodJetFFlo-JetMale10Full ConeHHFullJetSSMSolid-JetMale13HH-WFullJetSSMWSolid-JetMale16GGFullJetSMSolid-JetMale13GG-WFullJetSMWSolid-JetMale16GFullJetSFSolid-JetFemale13G-WFullJetSFWSolid-JetFemale16GGAFullJetTSMTan-JetMale14GAFullJetTSFTan-JetFemale14Square SprayHH-SQFullJetSSMQSquare-JetMale23GG-SQFullJetSMQSquare-JetMale23G-SQFullJetSFQSquare-JetFemale23Hollow ConeBWhirlJetTMTan-JetMale18B-WWhirlJetTMWTan-JetMale21AWhirlJetTFTan-JetFemale18A-WWhirlJetTFWTan-JetFemale21BDWhirlJetSHHahn SprayletMale24BDMWhirlJetSH - ABSHahn SprayletMaleCallAtomizing SprayLNNAMMist-JetMale3LNAFMist-JetFemale3NNPMist-JetMale3Fan-Jet, Flo-Jet, Solid-Jet, Tan-Jet, Square-Jet, Hahn, and Mist-Jet are trademarks of the Wm. Steinen Mfg , FloodJet, FullJet and WhirlJet are trademarks of the Spraying Systems Co.

Steinen/HahnSpraying SysJoy MiningDecimalFraction10 PSI20 PSI40 PSI100 PSI20 PSI80 PSISH 2BD 2.078/.0785/64 - 5/.6360o70oSH 3-1BD 3-101566237-0007.094/.0633/32 - 1/16-9o65oSH 3-2BD 3-201566237-0051.094/.0783/32 - 5/.6957o74oSH 3BD 301566237-0006.094/.0943/32 - 3/.9564o77oSH 3-5BD 3-5.094/.1253/32 - 1/.180o95oSH 3-8BD 3-801566237-0012.094/.1563/32 - 5/.380o95oSH 5-2BD 5-2.109/.0787/64 - 5/64-0o65oSH 5-3BD 5-3.109/.0947/64 - 3/32-o75oSH 5BD 501566237-0047.109/.1257/64 - 1/.667o76oSH 8BD 8.156/.1565/32 - 5/.565o70oSH 10BD 10.156/.1725/32 - 11/.265o72oSH 20-1n/a.156/.0635/32 - 1/.7415o25oSH 20-2n/a.156/.0785/32 - 5/.2025o45oSH 20-3n/a.156/.0945/32 - 3/.0035o45o
Nozzle Design Features and Benefits
Steinen is the leading designer and manufacturer of misting nozzles in the world. The quality and precision of our misting nozzles cannot be matched by any other nozzle manufacturer.
What sets Steinen apart is our ability to produce nozzles that can create a finely atomized spray with uniform droplet size, consistent spray angles, and at lower pressures than other manufacturer's nozzles. The result is a nozzle that offers the highest performance.
However, don't confuse highest quality and performance with the highest price. Due to our significant production volumes of these misting nozzles, Steinen's production efficiencies mean very competitive prices. Steinen offers a wide variety of misting nozzles to satisfy almost any requirement. Nozzles are offered in five different configurations, three different spray angles, numerous flow rates from 0.37 gallons per hour (GPH) up to 124 GPH, at pressures from 40 PSI to 500 PSI, in various types of stainless steel.
Five types of nozzles are available:
?
the single nozzle tip (Type A),
?
the nozzle tip (Type A) in a female adapter of various pipe threads (Type AF),
?
the nozzle tip (Type A) in a male adapter of various pipe threads (Type AM),
?
the compact sized nozzle tip (Type P)
?
the miniature sized nozzle tip with removable internal components (Type MM).
Spray Characteristics - The very best misting nozzle available! Uniform hollow cone spray pattern with a fine micro-atomized mist spray. Fog-like spray results with pressures over 150 P.S.I. Spray angles of 70, 80, and 90 degrees are available, with 70 degrees being standard, measured @ 150 P.S.I. Construction - Type A consists of basic nozzle tip with 9/16"-24 UNF connection and 100 mesh strainer (for capacities of 0.37, 0.50 and 0.75 GPH, a 200 mesh strainer is furnished). Type AM consists of Type A nozzle tip/strainer and 1/8", 1/4" or 3/8" NPT male adapter. Type AF consists of Type A nozzle tip/strainer and 1/8" or 1/4" female adapter. Materials - Nozzle tip (all types) are furnished in 416 or 303 stainless steel. Type "AM" (Male) and Type "AF" (Female) adapters are furnished in 303 stainless steel or brass.
Type AF & AM Full Size Nozzles
Spray Characteristics - Uniform mist spray pattern with a fine micro-atomized mist spray. Spray angles of 70, 80, and 90 degrees are available, with 70 degrees being standard, measured @ 150 P.S.I. Construction - Type P consists of a compact nozzle body with 1/4" male NPT connection and 100 mesh strainer (for capacities of 0.37, 0.50 and 0.75 GPH, a 200 mesh strainer is furnished). Materials - Nozzle is furnished in 416 or 303 stainless steel.
Type P Compact Nozzles
Spray Characteristics - Uniform mist spray pattern with a fine micro-atomized mist spray. Spray angle of 80 degrees is standard. Construction - One of the smallest misting nozzles available and the very best misting spray performance for it's size. Type MN consists of a miniature nozzle body with 1/8" male NPT connection and 100 mesh strainer (for capacities of 0.5 and 0.75 GPH, a 200 mesh strainer is furnished). This nozzle can be easily disassembled for inspection and cleaning. Materials - Nozzle is furnished in 303 stainless steel
TYPE AF
TYPE AM
TYPE P
TYPE MN
Female
Male
Male
Male
1/8” & 1/4”
1/8”
1/4”
1/8”, 1/4” & 3/8”
TYPES A, AF, AM, P & MN
Spray Angles 70o, 80o & 90o
Page 3
Steinen Mfg. Co. 29 East Halsey Road Parsippany, NJ 07054 T: 973-887-6400 F: 973-887-4632 Email: info@ www.
Fine Mist Nozzles
TYPE MN: Availability limited to flow rates from .50 to 5.0 G.P.H. at 80.
Your Problem: Your application requires a uniform spray pattern in a fine atomizing spray nozzle with instantaneous shut-off at the orifice - no dripping - no leaking
The Solution: The competitively priced Steinen Drip-Free Fogging Nozzle
The Steinen stainless steel Drip-Free Misting Nozzle has been refined over the years by our top engineers to reward you with a flawless performance, accurate flow and spray angle, and instant shut-off at the orifice in less than 250 ms. We developed two different check valve spray nozzles for your system requirements:
-
Type WC500 - for the standard pressure shut off system (≈60 p.s.i. cracking pressure) - Type WCH500 - for the high pressure shut off system (≈80 p.s.i. cracking pressure) High grade 303 stainless steel keeps nozzles looking good for the life of the installation. The Check Valve located in the mister nozzle body instantaneously stops dripping and leaking which is necessary in such situations where any drips and leaks are unacceptable. Significantly outperforms any slim line misting nozzle.
Fine atomization, no drip, spray nozzles are suitable for almost all misting applications:
?
greenhouse spray nozzles
?
mist cooling spray nozzles
?
pest control spray nozzles
?
humidification spray nozzles
?
poultry spray nozzles
?
fog systems spray nozzles
?
coating spray nozzles
?
dust suppression spray nozzles
?
chemical spray nozzles
?
livestock spray nozzles
?
mosquito spray nozzles
?
other fine spray nozzles applications
PSI
160
200
250
GPH
.75
.85
.95
OZ/M
1.6
1.8
2.00
Steinen offers a wide variety of flat spray nozzles to satisfy almost any requirement. Nozzles are offered in 10 different spray angles from 0° to 110°, numerous flow rates from 0.20 gallons per minute (GPM) up to 50 GPM, at pressures from 5 PSI to 1,000 PSI, in various types of steel, stainless steel, brass and CPVC. Three types of nozzle construction are available:
?
the single piece nozzle (Type V),
?
the four piece removable tip nozzle (Type FA),
?
and the low capacity/high pressure nozzle (Type VHP).
Spray Characteristics - Flat spray nozzle with high impact, sharply defined spray pattern without heavy edges. This type of high velocity spray is very useful in cleaning and coating applications. Spray angles of 0, 15, 25, 40, 50, 65, 80 and 90 degrees are available. Construction - One-piece design with no cores or internal members to clog. Nozzles available in 1/8", 1/4", 3/8", 1/2", 3/4", and 1" NPT male pipe thread. Materials - These nozzles are available in 303 & 316 Stainless Steel, mild steel, brass and CPVC.
Type V
Spray Characteristics - Steinen engineered the VHP nozzle specifically for high pressure spray cleaning and washing processes. A flat, evenly distributed fan pattern provides maximum impact throughout the complete spray pattern. Unexcelled accuracy of flow and spray angle rating have been attained through precision manufacturing technology. Spray angles of 0, 15, 25, 40, 50, 65, 80 and 90 degrees are available. Construction - Two-piece design with brass body and locked-in stainless steel orifice insert. Nozzles available in 1/8" or 1/4" NPT male or female pipe thread.
Type VHP
Type FA
Spray Characteristics - Flat, high impact, sharply defined spray pattern without heavy edges. This type of high velocity spray is excellent for cleaning applications. Spray angles of 0, 15, 25, 40, 50, 65, 80, 95 and 110 degrees are available. Construction - Nozzle is four parts: cap, orifice tip, strainer with 100 mesh screen, and the adapter. No cores or internal vanes to clog. Orifice tip adjustable directionally without disturbing the male or female pipe connection. Available in 1/8" and 1/4" NPT male & female thread. Materials - These nozzles are available in 303 & brass.
Type SN579 3/8” FanJet flat spray nozzles produce a uniform flat spray.
FanJet SN-579 nozzles are manufactured by HAHN Industries, a Division of Steinen. These nozzles are replacements for equivalent Spraying Systems Type H-U and H-VV VeeJet? nozzles.
Page 9
Flat Sprays
Above are popular sizes, but Steinen has many more available.
Type SN579-40 PSI60 PSI80 PSI100 PSI40 PSI80 PSI15.5815o18o25.5825o30o40.5840o45o50.5850o55o65.7965o72o65.9565o72o65.2665o72o65.5865o72o80.7980o85o80.5880o85o90.7990o95o90.5890o95oRATED CAPACITY (gallons/minute)SPRAY ANGLE
VeeJet? is a registered trademark of the Spraying Systems Co.
Steinen Mfg. Co. 29 East Halsey Road Parsippany, NJ 07054 T: 973-887-6400 F: 973-887-4632 Email: info@ www.
View of the spray fan
Side view of the spray
Many customers require the widest flat spray possible. For those applications, Steinen has designed the Flo-Jet? flat spray wide angle nozzle (Steinen Type F nozzles). These wide angle flat spray nozzles achieve between 88° and 165° spray angles based on the flow rate of the nozzle and the operating pressure. See the table below for the spray angle you can expect at a given flow and pressure. Numerous flow rates are available from 0.10 gallons per minute (GPM) up to 57 GPM, at pressures from 3 PSI to 60 PSI, in various types of steel, stainless steel, brass and CPVC.
Nozzle Design Features and Benefits
Type F
Spray Characteristics - Wide angle deflector type, low impact, flat spray pattern. This type of spray nozzle is useful for coating and cleaning processes. Spray angles, depending on pressure (see table below) can vary from 88 to 165 degrees. Information on capacities and angles not listed are available upon request. Spray exits the nozzle at a 70° degree angle.
Construction - One-piece design, no cores or internal members to clog. Nozzles have 1/8" 1/4", 3/8", 1/2" and 3/4" male pipe size connections.
Materials - Stainless steel spray nozzles (303 nozzles as well as 316 nozzles), Brass, and other materials available upon request.
The Solid-Jet? wide angle spray nozzle provides a solid (full) cone pattern over a broad surface area with uniform droplet distribution. This nozzle allows for a wide spray distribution where the nozzle needs to be closer the item being sprayed. The Solid-Jet? wide angle spray nozzle is available in female NPT (Type SFW) or male threads (Types SMW & SSMW). Numerous flow rates are available from 0.22 gallons per minute (GPM) up to 50 GPM, at pressures typically in the range of 3 PSI to 150 PSI, in various types of steel, stainless steel and brass. Two types of nozzle construction are available:
?
the three piece nozzle with a removable tip (Types SFW & SMW),
?
and the wide angle two piece nozzle (Type SSMW).
Nozzle Design Features and Benefits
Spray Characteristics - Uniform, solid cone spray pattern extended to a wide spray angle. The nozzle provides effective coverage of a wider area using fewer nozzles. Nozzles spray between 90 and 120 degrees. See product chart below for the angle you can expect at a certain flow rate and pressure.
Construction - Nozzle types SFW and SMW are of a three piece design. The nozzle tip and internal vane are removable without disturbing the male or female pipe connection. Nozzles available in 1/8", 1/4", 3/8", 1/2", 3/4" & 1" male or female NPT pipe size connections.
Spray Characteristics - Spray characteristics are the same as the SFW & SMW types. See product chart below for the angle you can expect at a certain flow rate and pressure. Construction - One-piece design, no cores or internal members to clog. Nozzles have 1/8" 1/4", 3/8", 1/2" and 3/4" male pipe size connections.
Materials - Stainless steel spray nozzles (303 stainless as well as 316 stainless), brass, steel and other materials available upon request.
SPRAYLET? HOLLOW CONE NOZZLES
TYPE SH (Steinen/Hahn)
NozzleInletWeightTypeMaterialConn. (in.)A (in.)B (in.)C (in.)D (in.)Approx.(oz.)All SH nozzlesBrass3/8"1 3/32"1 7/32"11/16"1/2"1DIMENSIONS & WEIGHTS
The Type SH Spraylet? nozzle is manufactured by HAHN Industries, a Division of Steinen. These nozzles are direct replacements for equivalent Spraying Systems type BD WhirlJet? nozzles. FOR MORE INFORMATION, EACH OF THE ABOVE NOZZLES HAS AN INDIVIDUAL SPECIFICATION DATA SHEET AVAILBLE AT www./hahn
WhirlJet? is a registered trademark of the Spraying Systems Co.
Steinen/HahnSpraying SysJoy MiningDecimalFraction10 PSI20 PSI40 PSI100 PSI20 PSI80 PSISH 2BD 2.078/.0785/64 - 5/.6360o70oSH 3-1BD 3-101566237-0007.094/.0633/32 - 1/16-9o65oSH 3-2BD 3-201566237-0051.094/.0783/32 - 5/.6957o74oSH 3BD 301566237-0006.094/.0943/32 - 3/.9564o77oSH 3-5BD 3-5.094/.1253/32 - 1/.180o95oSH 3-8BD 3-801566237-0012.094/.1563/32 - 5/.380o95oSH 5-2BD 5-2.109/.0787/64 - 5/64-0o65oSH 5-3BD 5-3.109/.0947/64 - 3/32-o75oSH 5BD 501566237-0047.109/.1257/64 - 1/.667o76oSH 8BD 8.156/.1565/32 - 5/.565o70oSH 10BD 10.156/.1725/32 - 11/.265o72oSH 20-1n/a.156/.0635/32 - 1/.7415o25oSH 20-2n/a.156/.0785/32 - 5/.2025o45oSH 20-3n/a.156/.0945/32 - 3/.0035o45
The unique Square-Jet?square spray nozzle can spray a nearly square spray pattern with uniform droplet distribution. The Square-Jet?square spray nozzle is available in female NPT (Type SFQ) or male threads (Types SMQ, SSMQ & SSMQW). Numerous flow rates are available from 0.22 gallons per minute (GPM) up to 38 GPM, at pressures typically in the range of 3 PSI to 150PSI, in various types of steel, stainless steel and brass. Three types of nozzle construction are available: ?the three piece nozzle with a removable cap (Types SFQ & SMQ),?the two piece removable internal member (Type SSMQ),?and the wide angle two piece nozzle (Type SSMQW).Types SFQ & SMQSpray Characteristics–Square shaped spray with uniform distribution and atomization throughout the entire spray pattern. Atomization is finest at higherpressures. Nozzles spray between 55 and 80 degree spray angles. See product chart below for the angle you can expect at a certain flow rate and pressure. Construction–Nozzle types SFQ and SMQ are of a three piece design. The nozzle cap and internal member are removable without disturbing the male or female pipe connection. Nozzles available in 1/8”, 1/4", 3/8“& 1/2“male or female NPT pipe size connections. Type SSMQSpray Characteristics–Similar in spray to the SFQ & SMQ types. Square shaped spray between 55 and 90 degree spray angles. See product chart below for the angle you can expect at a certain flow rate and pressure. Construction–Nozzle type SSMQ is a two piece design with a removable internal member. Nozzles available in 1/8”, 1/4", 3/8“, 1/2“, 3/4”& 1”male NPT pipe size connections. Materials--Stainless steel spray nozzles (303 stainless as well as 316 stainless), brass, steel and other materials available upon request.
Page 22
Steinen Mfg. Co. 29 East Halsey Road Parsippany, NJ 07054 T: 973-887-6400 F: 973-887-4632 Email: info@ www.
Square Spray Nozzles
Copyright 2013 Wm Steinen Mfg Co. & Steinen GmbH
Square-Jet? Square Spray Nozzles
SPRAYLET? HOLLOW CONE NOZZLES
TYPE SH (Steinen/Hahn)
NozzleInletWeightTypeMaterialConn. (in.)A (in.)B (in.)C (in.)D (in.)Approx.(oz.)All SH nozzlesBrass3/8"1 3/32"1 7/32"11/16"1/2"1DIMENSIONS & WEIGHTS
The Type SH Spraylet? nozzle is manufactured by HAHN Industries, a Division of Steinen. These nozzles are direct replacements for equivalent Spraying Systems type BD WhirlJet? nozzles. FOR MORE INFORMATION, EACH OF THE ABOVE NOZZLES HAS AN INDIVIDUAL SPECIFICATION DATA SHEET AVAILBLE AT www./hahn
WhirlJet? is a registered trademark of the Spraying Systems Co.
Steinen/HahnSpraying SysJoy MiningDecimalFraction10 PSI20 PSI40 PSI100 PSI20 PSI80 PSISH 2BD 2.078/.0785/64 - 5/.6360o70oSH 3-1BD 3-101566237-0007.094/.0633/32 - 1/16-9o65oSH 3-2BD 3-201566237-0051.094/.0783/32 - 5/.6957o74oSH 3BD 301566237-0006.094/.0943/32 - 3/.9564o77oSH 3-5BD 3-5.094/.1253/32 - 1/.180o95oSH 3-8BD 3-801566237-0012.094/.1563/32 - 5/.380o95oSH 5-2BD 5-2.109/.0787/64 - 5/64-0o65oSH 5-3BD 5-3.109/.0947/64 - 3/32-o75oSH 5BD 501566237-0047.109/.1257/64 - 1/.667o76oSH 8BD 8.156/.1565/32 - 5/.565o70oSH 10BD 10.156/.1725/32 - 11/.265o72oSH 20-1n/a.156/.0635/32 - 1/.7415o25oSH 20-2n/a.156/.0785/32 - 5/.2025o45oSH 20-3n/a.156/.0945/32 - 3/.0035o45
FLUSH-FIT? STAPLE LOCKING SPRAY NOZZLE
The Type 603-2801 FLUSH-FIT? staple locking nozzle is available in 303 stainless steel, manufactured by HAHN Industries, a Division of Steinen.
Type 603-2801 FLUSH-FIT? staple locking spray nozzles produce a precision uniform spray are generally used in Longwall and Continuous Miner applications.
FLUSH-FIT? TYPE “603-2801”
29/32”
1-1/16”
JET SPRAY (No inlet orifice insert)
Copyright 2013 Wm Steinen Mfg Co. & Steinen GmbH
SteinenSPRAY ANGLE (approx.)Part #DecimalFractionMMInches40 PSI100 PSI150 PSI200 PSI250 PSI@ 100 PSI603-2801-10-SC.078"5/64"1.00.0.530.5925°603-2801-12-1.2C.078"5/64"1.20.0.630.7030°603-2801-16-CC (1/16").078"5/64"1.60.0.301.4550°603-2801-20-MC.078"5/64"2.00.0.671.8660°603-2801-24-DC (3/32").078"5/64"2.40.0.112.3565°603-2801-30-TC.078"5/64"3.00.1.452.7365°INLET DIAMETERS (2 inlets at 35° angles with a .032" center inlet)RATED CAPACITY (gallons/minute)OUTLET ORIFICE SPRAY ANGLESteinen(approx.)Part #DecimalFractionMMInches40 PSI100 PSI150 PSI200 PSI250 PSI@ 100 PSI603-2801-10-SW.125"1/8"1.00.0.460.5125°603-2801-12-1.2W.125"1/8"1.20.0.530.5930°603-2801-16-CW (1/16").125"1/8"1.60.0.860.9640°603-2801-20-MW.125"1/8"2.00.0.151.2845°603-2801-24-DW (3/32").125"1/8"2.40.0.481.6560°603-2801-30-TW.125"1/8"3.00.1.922.1470°INLETOUTLET ORIFICE RATED CAPACITY (gallons/minute)SPRAY ANGLESteinenINLET(approx.)Part #No InsertMMInches40 PSI100 PSI150 PSI200 PSI250 PSI@ 100 PSI603-2801-10-SJNone1.00.0.470.520°603-2801-12-1.2JNone1.20.0.550.610°603-2801-16-CJ (1/16")None1.60.0.281.430°603-2801-20-MJNone2.00.0.721.920°603-2801-24-DJ (3/32")None2.40.0.713.020°603-2801-30-TJNone3.00.1.224.710°
Popular Sizes
FanJet SN-579 nozzles are manufactured by HAHN Industries, a Division of Steinen. These nozzles are replacements for equivalent Spraying Systems Type H-U and H-VV VeeJet? nozzles.
Type SN579-45 PSI50 PSI55 PSI60 PSI65 PSI70 PSI75 PSI80 PSIALL Nozzles Ending in ..71Type SN579-85 PSI90 PSI95 PSI100 PSI105 PSI110 PSI115 PSI120 PSIALL Nozzles Ending in ..87CALCULATED FLOW RATES (gallons/minute)
Type SN579 3/8” FanJet flat spray nozzles are available in two body styles. These nozzles are available in Brass or 303 Stainless Steel.
SN579-1
SN579-2 Type SN579-1 or 240 PSI60 PSI80 PSI100 PSI40 PSI80 PSI15.7915o18o25.7925o30o40.7940o45o50.7950o55o65.7965o72o80.7980o85o90.7990o95o
FanJet SN-579 nozzles are manufactured by HAHN Industries, a Division of Steinen. These nozzles are replacements for equivalent Spraying Systems Type H-U and H-VV VeeJet? nozzles.
Type SN579 3/8” FanJet flat spray nozzles are available in two body styles. These nozzles are available in Brass or 303 Stainless Steel.
SN579-1
SN579-2 InletWrenchConn. (in.)A (in.)B (in.)FlatsType SN579-13/8"1-3/16"3/4"n/aType SN579-23/8"15/16"11/16"5/16"DIMENSIONSType SN579-45 PSI50 PSI55 PSI60 PSI65 PSI70 PSI75 PSI80 PSIALL Nozzles Ending in ..85Type SN579-85 PSI90 PSI95 PSI100 PSI105 PSI110 PSI115 PSI120 PSIALL Nozzles Ending in ..04
CALCULATED FLOW RATES (gallons/minute)
Type SN579-1 or 240 PSI60 PSI80 PSI100 PSI40 PSI80 PSI15.9515o18o25.9525o30o40.9540o45o50.9550o55o65.9565o72o80.9580o85o90.9590o95o
FanJet SN-579 nozzles are manufactured by HAHN Industries, a Division of Steinen. These nozzles are replacements for equivalent Spraying Systems Type H-U and H-VV VeeJet? nozzles.
Type SN579 3/8” FanJet flat spray nozzles are available in two body styles. These nozzles are available in Brass or 303 Stainless Steel.
SN579-1
SN579-2 InletWrenchConn. (in.)A (in.)B (in.)FlatsType SN579-13/8"1-3/16"3/4"n/aType SN579-23/8"15/16"11/16"5/16"DIMENSIONS
CALCULATED FLOW RATES (gallons/minute)
Type SN579-45 PSI50 PSI55 PSI60 PSI65 PSI70 PSI75 PSI80 PSIALL Nozzles Ending in ..13Type SN579-85 PSI90 PSI95 PSI100 PSI105 PSI110 PSI115 PSI120 PSIALL Nozzles Ending in ..40Type SN579-1 or 240 PSI60 PSI80 PSI100 PSI40 PSI80 PSI15.2615o18o25.2625o30o40.2640o45o50.2650o55o65.2665o72o80.2680o85o90.2690o95o
100 Series 1/4” FanJet flat spray nozzles are available in Brass, Nickel Plated Brass and 303 Stainless Steel. Nozzles can also be supplied with Mesh filters if desired.
The above flows are rated at 40 PSI. For flow ratings of these nozzles at different pressures, see the look-up table on the following page. InletConn. (in.)A (in.)B (in.)Series 1001/4"15/16"9/16"DIMENSIONS15o25o40o50o65o80o90o110o0.3GPM 35003650380039003110030.4GPM 45004650480049004110040.5GPM 55005650580059005110050.6GPM 65006650680069006110060.8GPM 8500865088008900811008FLOW1.0GPM 0501065108010901011010PARTRATE1.5GPM 550 01511015NUMBERS2.0GPM 05020652080209020110203.0GPM 05030653080309030110304.0GPM 05040654080409040110405.0GPM 05050655080509050110506.0GPM 05060656080609060110607.0GPM 05070657080709070110708.0GPM 0508065808080908011080SPRAY
TYPE “PB” FULL CONE WIDE ANGLE NOZZLE
HAHN TYPE “PB” FULL CONE WIDE ANGLE NOZZLE DATA SHEET
Type “PB” full cone nozzles spray 2.7 gallons per minute in a uniform wide angle (120o) cone spray and are generally used in mining and other applications for dust suppression.
The Type “PB” nozzle is manufactured by HAHN Industries, a Division of Steinen.
TYPE “PB” (Steinen/Hahn)
Type “PB” nozzle

上海滄燦自動化科技有限公司銷售東方 個，針對東方 個客戶提供相關咨詢服務，需要了解東方 個型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。

 

相關產品

 

 

公司簡介

 

其它地區 圓度檢測儀 類似信息：