巴斯夫PBT Ultradur S 4090 G4

規格：25KG/袋

所屬類型：其它原材料

品牌：

價格：28
發布時間：2017/05/11 09:39
數量：30
所在地：廣東深圳

點擊詢價

掃碼打電話

產品詳情

規格：25KG/袋
產地：其他-德國

巴斯夫PBT Ultradur S 4090 G4

我司長期現貨供應BASF公司PBT全系列牌號,訂購請認準金先生159-1681-6001

QQ 2392218157

BASF Ultradur S 4090 G4 20% Glass Filled PBT

Categories:

Polymer;Thermoplastic;Polyester, TP;Polybutylene Terephthalate (PBT);Polybutylene Terephthalate (PBT), 20% Glass Fiber Filled

Material Notes:

Ultradur S 4090 G4 is a 20% glass reinforced PBT+ASA blend. It produces moldings with good surface finish,is resistant to chemicals and stress cracking, and has low shrinkage and warpage.

Applications: Plug connectors, housings and sunroof.

Vendors:

Add to Folder:My Folder


Physical Properties	Metric	English	Comments
Density	1.39g/cc	0.0502lb/in3	ISO 1183
Water Absorption	0.40 %	0.40 %	DIN 53495/1L
Moisture Absorption at Equilibrium	0.20 %	0.20 %	23°C/50% R.H.
Viscosity Test	105cm3/g	105cm3/g	Viscosity number; ISO 1628
Linear Mold Shrinkage, Flow	0.0016cm/cm	0.0016in/in	Sheet
	0.0043cm/cm	0.0043in/in	60x60x2mm; ISO 294
Linear Mold Shrinkage, Transverse	0.0074cm/cm	0.0074in/in	60x60x2mm; ISO 294
	0.0082cm/cm	0.0082in/in	Sheet
Melt Flow	32.0g/10 min @Load 2.16 kg, Temperature 275 °C	32.0g/10 min @Load 4.76 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	153MPa	22200psi	ISO 2039-1
Tensile Strength at Break	100MPa	14500psi	5mm/min; ISO 527-2
Tensile Strength	60.0MPa @Temperature 100 °C	8700psi @Temperature 212 °F	ISO 527
	95.0MPa @Temperature 50.0 °C	13800psi @Temperature 122 °F	ISO 527
	120MPa @Temperature 23.0 °C	17400psi @Temperature 73.4 °F	ISO 527
	165MPa @Temperature -40.0 °C	23900psi @Temperature -40.0 °F	ISO 527
Elongation at Break	2.5 %	2.5 %	5mm/min; ISO 527-2
Modulus of Elasticity	6.90GPa	1000ksi	ISO 527-2
Flexural Strength	151MPa	21900psi	ISO 178
Charpy Impact Unnotched	5.50J/cm2	26.2ft-lb/in2	ISO 179/1eU
Charpy Impact, Notched	0.700J/cm2	3.33ft-lb/in2	ISO 179/1eA
Dart Drop, Total Energy	<=5.00J	<=3.69ft-lb	ISO 6603-1
Tensile Creep Modulus, 1000 hours	4700MPa	682000psi	ISO 899-1

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+15ohm-cm	2.00e+15ohm-cm	IEC 60093
Surface Resistance	1.00e+14ohm	1.00e+14ohm	IEC 60093
Dielectric Constant	3.6 @Frequency 1.00e+6 Hz	3.6 @Frequency 1.00e+6 Hz	IEC 60250
	3.7 @Frequency 100 Hz	3.7 @Frequency 100 Hz	IEC 60250
Dielectric Strength	96.0kV/mm	2440kV/in	IEC 243/1
Dissipation Factor	0.0030 @Frequency 100 Hz	0.0030 @Frequency 100 Hz	IEC 60250
	0.019 @Frequency 1.00e+6 Hz	0.019 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	125V	125V	Test solution B; IEC 112
	450V	450V	Test solution A; IEC 60112

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	4.00μm/m-°C @Temperature 23.0 - 80.0 °C	2.22μin/in-°F @Temperature 73.4 - 176 °F	DIN 53752
Specific Heat Capacity	1.50J/g-°C	0.359BTU/lb-°F	IEC 1006
Thermal Conductivity	0.280W/m-K	1.94BTU-in/hr-ft2-°F	DIN 52612
Melting Point	220-225°C	428-437°F	ISO 11357-3
Maximum Service Temperature, Air	110°C	230°F	at 50% loss of tensile strength after 20000h; IEC 216-1
	140°C	284°F	at 50% loss of tensile strength after 5000h; IEC 216-1
	170°C	338°F
Deflection Temperature at 0.46 MPa (66 psi)	205°C	401°F	ISO 75-2
Deflection Temperature at 1.8 MPa (264 psi)	160°C	320°F	ISO 75-2
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in
Flame Spread	<=100mm/min	<=3.94in/min	DIN 75200
Glow Wire Test	760°C @Thickness 3.00 mm	1400°F @Thickness 0.118 in	IEC 695

Processing Properties	Metric	English	Comments
Melt Temperature	250-275°C	482-527°F	Injection molding
	270°C	518°F	for shrinkage test
Mold Temperature	60.0-100°C	140-212°F
	80.0°C	176°F	for shrinkage test

Descriptive Properties
Color	Natural
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
	Light stabilized or stable to light
	Lubricant
	U.V. stabilized or stable to weather

Physical Properties Metric English Comments

Density 1.39g/cc 0.0502lb/in3 ISO 1183

Water Absorption 0.40 % 0.40 % DIN 53495/1L

Moisture Absorption at Equilibrium 0.20 % 0.20 % 23°C/50% R.H.

Viscosity Test 105cm3/g 105cm3/g Viscosity number; ISO 1628

Linear Mold Shrinkage, Flow 0.0016cm/cm 0.0016in/in Sheet

0.0043cm/cm 0.0043in/in 60x60x2mm; ISO 294

Linear Mold Shrinkage, Transverse 0.0074cm/cm 0.0074in/in 60x60x2mm; ISO 294

0.0082cm/cm 0.0082in/in Sheet

Melt Flow 32.0g/10 min
@Load 2.16 kg,
Temperature 275 °C 32.0g/10 min
@Load 4.76 lb,
Temperature 527 °F ISO 1133

Mechanical Properties Metric English Comments

Ball Indentation Hardness 153MPa 22200psi ISO 2039-1

Tensile Strength at Break 100MPa 14500psi 5mm/min; ISO 527-2

Tensile Strength 60.0MPa
@Temperature 100 °C 8700psi
@Temperature 212 °F ISO 527

95.0MPa
@Temperature 50.0 °C 13800psi
@Temperature 122 °F ISO 527

120MPa
@Temperature 23.0 °C 17400psi
@Temperature 73.4 °F ISO 527

165MPa
@Temperature -40.0 °C 23900psi
@Temperature -40.0 °F ISO 527

Elongation at Break 2.5 % 2.5 % 5mm/min; ISO 527-2

Modulus of Elasticity 6.90GPa 1000ksi ISO 527-2

Flexural Strength 151MPa 21900psi ISO 178

Charpy Impact Unnotched 5.50J/cm2 26.2ft-lb/in2 ISO 179/1eU

Charpy Impact, Notched 0.700J/cm2 3.33ft-lb/in2 ISO 179/1eA

Dart Drop, Total Energy <=5.00J <=3.69ft-lb ISO 6603-1

Tensile Creep Modulus, 1000 hours 4700MPa 682000psi ISO 899-1

Electrical Properties Metric English Comments

Volume Resistivity 2.00e+15ohm-cm 2.00e+15ohm-cm IEC 60093

Surface Resistance 1.00e+14ohm 1.00e+14ohm IEC 60093

Dielectric Constant 3.6
@Frequency 1.00e+6 Hz 3.6
@Frequency 1.00e+6 Hz IEC 60250

3.7
@Frequency 100 Hz 3.7
@Frequency 100 Hz IEC 60250

Dielectric Strength 96.0kV/mm 2440kV/in IEC 243/1

Dissipation Factor 0.0030
@Frequency 100 Hz 0.0030
@Frequency 100 Hz IEC 60250

0.019
@Frequency 1.00e+6 Hz 0.019
@Frequency 1.00e+6 Hz IEC 60250

Comparative Tracking Index 125V 125V Test solution B; IEC 112

450V 450V Test solution A; IEC 60112

Thermal Properties Metric English Comments

CTE, linear, Parallel to Flow 4.00μm/m-°C
@Temperature 23.0 - 80.0 °C 2.22μin/in-°F
@Temperature 73.4 - 176 °F DIN 53752

Specific Heat Capacity 1.50J/g-°C 0.359BTU/lb-°F IEC 1006

Thermal Conductivity 0.280W/m-K 1.94BTU-in/hr-ft2-°F DIN 52612

Melting Point 220-225°C 428-437°F ISO 11357-3

Maximum Service Temperature, Air 110°C 230°F at 50% loss of tensile strength after 20000h; IEC 216-1

140°C 284°F at 50% loss of tensile strength after 5000h; IEC 216-1

170°C 338°F

Deflection Temperature at 0.46 MPa (66 psi) 205°C 401°F ISO 75-2

Deflection Temperature at 1.8 MPa (264 psi) 160°C 320°F ISO 75-2

Flammability, UL94 HB
@Thickness 1.60 mm HB
@Thickness 0.0630 in

HB
@Thickness 0.800 mm HB
@Thickness 0.0315 in

Flame Spread <=100mm/min <=3.94in/min DIN 75200

Glow Wire Test 760°C
@Thickness 3.00 mm 1400°F
@Thickness 0.118 in IEC 695

Processing Properties Metric English Comments

Melt Temperature 250-275°C 482-527°F Injection molding

270°C 518°F for shrinkage test

Mold Temperature 60.0-100°C 140-212°F

80.0°C 176°F for shrinkage test

Descriptive Properties

Color Natural

Commercial Status Active America

Form Pellets

Impact Modified No

Primary Processing Technique Injection Molding

Processing Injection Molding

Special characteristic Heat stabilized or stable to heat

Light stabilized or stable to light

Lubricant

U.V. stabilized or stable to weather

巴斯夫PBT Ultradur S 4090 G4

標簽：其它原材料

深圳市鑫福塑膠有限公司銷售 25KG/袋，針對 25KG/袋客戶提供相關咨詢服務，需要了解 25KG/袋型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。

內容申明：華軸網為互聯網信息服務提供者，華軸網（含網站、客戶端等）所展示的商品的標題、價格、詳情等信息內容系由商家發布，其真實性、準確性和合法性均由商家負責。華軸網提醒您購買商品前注意謹慎核實，如您對商品的標題、價格、詳情等任何信息有任何疑問的，請?jiān)谫徺I前與商家溝通確認；如您發現商鋪內有任何違法/侵權信息，請立即向華軸網舉報并提供有效線索。

相關產品

公司簡介

深圳市鑫福塑膠有限公司總部位于東莞市黃江鎮, 是一家集開發、銷售工程塑料及化工原材料為一體的實體企業，自成立以來，積極開拓市場，業務輻射全國，實力雄厚、貨源充足、價格實惠。如今客戶已覆蓋整個...更多>>

企業信息

深圳市鑫福塑膠有限公司

經營模式：貿易型
所在地區：廣東深圳

認證商家

巴斯夫PBT Ultradur S 4090 G4

其它地區 其它原材料類似信息：

認證商家

特色服務

推廣服務

新手指南

采購商服務

在線客服

巴斯夫PBT Ultradur S 4090 G4

其它地區 其它原材料 類似信息：

認證商家

特色服務

推廣服務

新手指南

采購商服務

在線客服

其它地區 其它原材料類似信息：